PBW：零件重量

“Parts By Weight”（常缩写为 PBW）是一种表达成分比例的常用术语，尤其在食品、营养和化工等综合领域中广泛应用。该缩写便于快速书写和行业交流，其对应的中文翻译为“按重量计份数”或“重量份”，用于明确标注配方中各成分的相对质量关系。

Parts By Weight具体释义

  • 英文缩写：PBW
  • 英语全称：Parts By Weight
  • 中文意思：零件重量
  • 中文拼音：líng jiàn zhòng liàng
  • 相关领域： pbw 食品和营养

Parts By Weight的英文发音

例句

  1. When the content of SiC filler is 80 ~ 160 parts by weight ( based on 100 parts by weight epoxy resin ) the compressive strength has higher values and the bonding strength also has better level.
  2. 当碳化硅填料的质量份数在80～160（相对于环氧树脂100份）时，压缩强度达到较高值，粘接强度也保持在较好水平。
  3. Before neutralization and swelling, addition of 20 parts of shell monomer by weight, based on 100 parts by weight core-shell polymer improved stability of latex and contrast ratio.
  4. 在中和步骤中加入20%的壳单体，可以改善乳液的稳定性，且明显提高乳液的对比率。
  5. At room temperature, the solubility of elemental sulfur in such mixed dialkyl disulfides containing 7.1 or 30 parts of diethylamine per 100 parts of mixed dialkyl disulfides by weight exceeds that in traditional sulfur solvent, carbon disulfide.
  6. Ⅰ和二乙胺混合（重量比100∶7.1或100∶30）后，室温溶硫量超过传统的溶硫剂二硫化碳。
  7. On the premise of same shrinkage in different directions during sintering, a mathematic model of controlling injected parts dimension and qualities by controlling the weight deviations of injected green parts, which is proved to be correct in the experiment is proposed.
  8. 文章基于烧结收缩各向同性的前提下，提出了通过注射坯质量偏差控制注射坯尺寸精度和注射坯质量的数学模型，并在实验中验证了这一模型的正确性。
  9. Application range of Powder Injection Moulding advances greatly by replacing the traditional manufacturing process Manufacturers can produce complex metal parts which have bigger wall thickness by use of this technology recently Maximum weight of this metal part is 300g
  10. 通过代替传统的生产工艺，粉末注射成型的应用范围得到大大的提高。近年来，已能生产重量最大为300g，壁厚较大的复杂金属制件

本站英语缩略词为个人收集整理，可供非商业用途的复制、使用及分享，但严禁任何形式的采集或批量盗用

若PBW词条信息存在错误、不当之处或涉及侵权，请及时联系我们处理：675289112@qq.com。