ED：挤压方向

在化学材料科学等学术领域，“Extrusion Direction”这一专业术语常被缩写为“ED”，以便在日常交流、论文撰写及技术文档中便捷使用。该术语的中文释义为“挤压方向”，主要用于描述材料在加工成型过程中所受挤压作用的方向。

Extrusion Direction具体释义

  • 英文缩写：ED
  • 英语全称：Extrusion Direction
  • 中文意思：挤压方向
  • 中文拼音：jǐ yā fāng xiàng
  • 相关领域： ed 化学

Extrusion Direction的英文发音

例句

  1. Their micro and macro fracture morphology were analyzed and compared, and the impact of the extrusion direction on value of plane strain fracture toughness also specifically considered.
  2. 研究了它们的微观和宏观断口形貌，并进行了分析对比，本试验还特别考虑了挤压方向(ED)因素对平面应变断裂韧度值的影响。
  3. The pressure of polymer increases along the extrusion direction.
  4. 聚合物的压力沿着挤出方向增大。
  5. The schmid factors of basal texture were zero both on extrusion direction and transverse direction. The slip-systems will not start in both directions.
  6. 基面织构在挤压方向(ED)和横向的Schmid因子都为O，在两个方向都不发生滑移。
  7. In the as-extruded alloy, the typical basal texture ( with basal plane parallel to extrusion direction ) was observed, the grain size was refined, and the mechanical properties were improved.
  8. 通过对铸态合金进行热挤压变形，合金中形成了典型的基面织构（基面平行于挤压方向(ED)），晶粒显著细化，合金的力学性能得到了明显的改善。
  9. As different billet preheat temperature was simulated, the deformation metal temperature was gradually increased along the extrusion direction while the increase of billet preheat temperature, and extrusion pressure was declined gradually.
  10. 采用不同的坯料预热温度进行模拟，变形金属温度沿挤压方向(ED)逐渐升高，随着坯料预热温度的升高，挤压压力逐渐下降。

本站英语缩略词为个人收集整理，可供非商业用途的复制、使用及分享，但严禁任何形式的采集或批量盗用

若ED词条信息存在错误、不当之处或涉及侵权，请及时联系我们处理：675289112@qq.com。